Programming Features; Entering Programming Mode; Cps (Computer Programming Software) - Motorola XT460 Guide De Démarrage Rapide

PROGRAMMING
FEATURES

Entering Programming Mode

Programming Mode is special radio mode that allows you
to program basic radio's features by using the radio's panel
programming.
To enter Programming Mode, press and hold the PTT
Button and the SB1 Button simultaneously for 3 seconds,
while turning ON the radio. A unique tone sounds,
indicating the radio has entered Programming Mode. The
radio LED blinks a green heartbeat.
Note: The default Programming Mode is set to 'Idle'
Programming Mode.
When the radio is set to Programming Mode, the
displays and the current channel aliasing name blinks to
indicate that you can rotate the Channel Selector Knob to
select the channel you want to program.
In Programming Mode, the radio is capable of setting
values for each channel by toggling between the different
programming modes available:
•Frequencies,
•CTCSS/DPL codes (Interference Eliminator Code),
•Scramble,
•Bandwidth,
•Maximum Channels,
•Call Tone,
•Microphone Gain and,
•Scan.
• To move along the different Programming Selection Mode
without saving changes, short press the PTT Button or
Button.
• To save changes, long press the PTT Button. The radio
returns to 'Idle' Programming Mode.
• When in 'Idle' Programming Mode, long press the PTT
button to exit the Programming Mode.
• Whenever you wrap around to the beginning of the
Programming Mode options, the radio automatically saves
all changes made, even if you turn OFF the radio.
• Exit the Programming Mode without saving changes (as
long as you have not wrap around to the beginning of the
Programming Mode options) by turning OFF the radio.
CPS (COMPUTER PROGRAMMING
SOFTWARE)
icon
Radio to be
programmed
CPS Programming Cable
Drop-in
Charger Tray
XT Series radios are programmable using the CPS. The
CPS is downloadable for free at
www.motorolasolutions.com.
USB Ports
15
English