Technical Data; Putting Into Service - REMS Cobra 22 Instructions D'emploi

eng
Introduce the rotating cable only when wearing the special glove provi-
•
ded, which permits the cable to run smoothly through the hand. Unsui-
table gloves, particularly rubber gloves, „stick" to the cable. This can lead
to accidents. For the same reason, never introduce the rotating cable with
a cloth.
Never work without first installing the guard for the chuck mount and the
•
guide hose for the cable. This is because the end of the cable projecting
from the machine will twist suddenly if the drain cleaning tool comes up
against some form of resistance and seizes.

1. Technical Data

1.1. Article numbers
REMS Cobra 22 drive unit with guide hose
REMS Cobra 32 drive unit with guide hose
Adapter drum Cobra 22/8
Adapter drum Cobra 32/8
Guide gloves, pair
Riveted guide glove, left
Riveted guide glove, right
Guide hose Cobra 22
Guide hose Cobra 32
Drain cleaning cables
Drain cleaning cable 8 x 7.5 m
Drain cleaning cable 16 x 2.3 m
Drain cleaning cable 22 x 4.5 m
Drain cleaning cable 32 x 4.5 m
Drain clean. cable 16 x 2.3 m (6 pcs.) in cable carrier 171201
Drain clean. cable 22 x 4.5 m (5 pcs.) in cable carrier 172201
Drain clean. cable 32 x 4.5 m (5 pcs.) in cable carrier 174201
Drain cleaning cable S 16 x 2 m
Drain cleaning cable S 22 x 4 m
Drain cleaning cable S 32 x 4 m
Drain cleaning cable with core 16 x 2.3 m
Drain cleaning cable with core 22 x 4.5 m
Drain cleaning cable with core 32 x 4.5 m
Cable reduction 22/16
Cable reduction 32/22
Cable carrier 16 (empty)
Cable carrier 22 (empty)
Cable carrier 32 (empty)
Cable joint separator 16
Cable joint separator 22/32
Drain cleaning tools
Straight auger 16
Straight auger 22
Straight auger 32
Bulbous auger 16
Bulbous auger 22
Bulbous auger 32
Funnel auger 16
Funnel auger 22
Funnel auger 32
Retrieving auger 16
Retrieving auger 22
Retrieving auger 32
Serrated blade borer 16/25
Serrated blade borer 22/35
Serrated blade borer 22/45
Serrated blade borer 32/55
Serrated cross-blade borer 16/25
Serrated cross-blade borer 16/35
Serrated cross-blade borer 22/35
Serrated cross-blade borer 22/45
Serrated cross-blade borer 22/65
Serrated cross-blade borer 32/45
Serrated cross-blade borer 32/65
Serrated cross-blade borer 32/90
Serrated cross-blade borer 32/115
Forked cutter 16
Cross-forked cutter 16
Serrated forked cutter 22/65
Serrated forked cutter 32/65
Serrated forked cutter 32/90
Root cutter 22/65
Root cutter 32/65
Root cutter 32/90
Chain flail 16, smooth rings
Chain flail 16, spiked links
Chain flail 22, smooth rings
Chain flail 22, spiked links
Chain flail 32, smooth rings
Chain flail 32, spiked links
1.2. Working range
REMS Cobra 22
172000
Cable Ø 8 mm (max. working length 10 m) Pipe Ø 10–50 (75) mm
174000
Cable Ø 16 mm (max. working length 40 m) Pipe Ø 20–100 mm
170011
Cable Ø 22 mm (max. working length 70 m) Pipe Ø 30–150 mm
170012
REMS Cobra 32
172610
Cable Ø 8 mm (max. working length 10 m) Pipe Ø 10–50 (75) mm
172611
Cable Ø 16 mm (max. working length 40 m) Pipe Ø 20–100 mm
172612
Cable Ø 22 mm (max. working length 100 m) Pipe Ø 30–150 mm
044110
Cable Ø 32 mm (max. working length 70 m) Pipe Ø 40–250 mm
044105
1.3. Working speed
REMS Cobra 22: Working spindle
170200
REMS Cobra 32: Working spindle
171200
172200
1.4. Electrical data
174200
Rated voltage
Power input
Rated current
171205
172205
Intermittent service
174205
171210
1.5. Dimensions
172210
REMS Cobra 22 drive unit L x W x H:
174210
REMS Cobra 32 drive unit L x W x H:
172154
1.6. Weights
174154
REMS Cobra 22 drive unit
171150
REMS Cobra 32 drive unit
172150
Tool set 16
174150
Tool set 22
171151
Tool set 32
172151
Cable set 6 x 16 x 2,3 m in cable carrier
Cable set 5 x 22 x 4,5 m in cable carrier
171250
Cable set 4 x 32 x 4,5 m in cable carrier
172250
1.7. Noise information
174250
Emission at workplace
171265
172265
1.8. Vibrations
174265
Weighted effective value of acceleration
171270
172270

2. Putting into Service

174270
2.1. Electrical connection
171275
Ensure that the mains voltage is correct! Before connecting the unit,
172275
check that the mains voltage is the same as specified on the rating plate.
174275
Only operate the machine off the mains using a 30mA fault current pro-
171280
tected switch (FI breaker).
172280
172281
2.2. Handling and selection of the drain cleaning cable required
174282
The machines REMS Cobra uses lengths of cable which can be connec-
171290
ted up as necessary. The machine REMS Cobra 22 comes either with
171291
the tool set 16 or 22 or both. The machine REMS Cobra 32 comes either
172290
with the tool set 22 or 32 or both. The cables can each be used without
172291
any modifications to the machine.
172293
For the REMS Cobra 32 machine, the cable and tool set 16 can also be
174291
used when using other clamping jaws 16 (accessories). To do this, re-
174293
move protecting device (2). Push in the spring brush until it touches
174295
using a screw driver. Push the whole clamping jaw forward and lift out
174296
backwards over the spiral pin. Fit clamping jaw 16 (set), Art.-No. 174101.
171305
171306 Then push clamping jaw 16 into the system bearer, push in the spring
172305 brush until it touches and push the clamping jaw over the spiral pin.
eng
174305
174306
172310
174310
174311
171340
171341
172340
172341
174340
174341
740 1 /min
520 1 /min
230 V 1~; 50 Hz
REMS Cobra 22 750 W
REMS Cobra 32 1050 W
REMS Cobra 22 3.3 A
REMS Cobra 32 5.8 A
REMS Cobra 22 AB 7/10 min
REMS Cobra 32 AB 3,5/10 min
535 x 225 x 535 mm
535 x 225 x 595 mm
19.1 kg
24.6 kg
1.8 kg
2.3 kg
1.9 kg
7.4 kg
20.6 kg
26.3 kg
75 dB (A)
2.5 m/s 2