Equipment Data - Dimplex SI 50TE Instructions D'installation Et D'utilisation

12

12 Equipment Data

Device information for brine-to-water heat pumps (heating only)
1 Type and order code
2 Design
2.1 Degree of protection according to EN 60 529
2.2 Installation location
3 Performance data
3.1 Operating temperature limits:
Heating water flow
Brine (heat source)
Antifreeze
Minimum brine concentration (-13 °C freezing temperature)
3.2 Temperature spread of heating water (flow/return flow) at B0 / W35K
3.3 Heat output / COP
3.4 Sound power level
3.5 Sound pressure level at a distance of 1 m
3.6 Heating water flow with an internal pressure differential of m³/h / Pa
3.7 Brine throughput with an internal pressure differential (heat source) of
3.8 Refrigerant; total filling weight
3.9 Lubricant; total filling weight
4 Dimensions, connections and weight
4.1 Device dimensions without connections
4.2 Device connections to heating system
4.3 Device connections to heat source
4.4 Weight of the transportable unit(s) incl. packing
5 Electrical connection
5.1 Nominal voltage; fuse protection
5.2 Nominal power consumption
5.3 Starting current with soft starter
Nominal current B0 W35 / cos ϕ
5.4
5.5 max. power consumption of compressor protection
(per compressor)
6 Complies with the European safety regulations
7 Additional model features
7.1 Water in device protected against freezing
7.2 Performance levels
7.3 Controller internal/external
1. This data indicates the size and capacity of the system. For an analysis of the economic and energy efficiency of the system, both the bivalence point and the regulation should
also be taken into consideration. The specified values, e.g. B10 / W55, have the following meaning: Heat source temperature 10 °C and heating water flow temperature 55 °C.
2. Operation with 2 compressor
3. Operation with 1 compressors
4. Note that additional space is required for pipe connections, operation and maintenance.
5. See CE declaration of conformity
6. The heat circulating pump and the heat pump controller must always be ready for operation.
E-7
°C
°C
1
at B-5 / W55 kW / ---
kW / ---
1
at B0 / W50 kW / ---
kW / ---
1
at B0 / W35 kW / ---
kW / ---
dB(A)
dB(A)
m³/h / Pa
type / kg
type / litres
4
H x W x L mm
Inch
Inch
kg
V / A
1
B0 W35 kW
A
A / ---
W
6
SI 50TE SI 75TE
IP21 IP21
Indoors Indoors
up to 60 up to 60
-5 to +25 -5 to +25
Monoethylene Monoethylene
glycol glycol
25% 25%
8.9 9.9
2
37.5 / 2.4 59.8 / 2.3
3
15.0 / 2.1 30.1 / 2.2
2
43.8 / 3.0 69.8 / 2.9
3
18.5 / 2.5 33.3 / 2.8
2
46.7 / 4.5 75.2 / 4.4
3
23.0 / 4.4 37.6 / 4.3
65 69
50 54
4.5 / 2000 6.5 / 2500
12.8 / 15700 20.5 / 17800
R404A / 8.6 R404A / 14.1
Polyolester Polyolester
(POE) / 6.5 (POE) / 6.5
1,890 x 1350 x 1,890 x 1350 x
775 775
G 1 1/2'' internal/ G 2'' internal/
external external
G 2 1/2'' internal/ G 2 1/2'' internal/
external external
486 571
400 / 50 400 / 63
10.45 16.95
56 105
18.9 / 0.8 30.58 / 0.8
65 65
5 5
Yes Yes
2 2
Internal Internal
SI 100TE SI 130TE
IP21 IP 21
Indoors Indoors
up to 60 up to 60
-5 to +25 -5 to +25
Monoethylene Monoethylene
glycol glycol
25% 25%
9.7 9.4
76.2 / 2.5 102.1 / 2.3
33.6 / 2.4 40.3 / 2.0
87.9 / 3.1 117.0 / 2.9
39.1 / 2.8 51.0 / 2.4
96.3 / 4.6 125.8 / 4.3
48.4 / 4.6 63.3 / 4.2
71 73
55 56
8.5 / 3600 11.5 / 2200
24.0 / 18600 34.0 / 26200
R404A / 20.5 R404A / 27.0
Polyolester Polyolester
(POE) / 13.2 (POE) / 16.0
1,890 x 1350 x 1,890 x 1350 x
775 775
G 2'' internal/ G 2 1/2'' internal/
external external
G 3'' internal/ G 3'' internal/
external external
652 860
400 / 80 400 / 80
20.93 29.24
120 115
37.8 / 0.8 52.76 / 0.8
75 130
5 5
Yes Yes
2 2
Internal Internal