Helios AIR1 RH 1500 Notice De Montage Et D'utilisation page 88

Table des Matières

Publicité

Installation and Operating Instructions
EN
m
DANGER
m
DANGER
m
DANGER
+
NOTE
ATTENTION
m
DANGER
Central ventilation units AIR1 RH
2�1�3 Shipping
The shipping must be carried out carefully. It is recommended to leave the unit in the original packaging until installation
to avoid possible damages and contamination.
The shipping must be carried out by trained and experienced personnel and the necessary safety precautions should
be taken to prevent overturning and slipping of the device. it should be ensured that the weight is evenly distributed
when shipping the unit.
m
Personal injury and/or material damage due to incorrect shipping!
It must be ensured that the means of transport/lifting is suitable to accommodate to the required weight and size
capacity.
– Make sure that the unit is firmly seated before lifting it.
m
Danger due to overhead loads!
Lifting gear, units, cables or tackle could be faulty or damaged.
– Never stand beneath suspended loads.
m
Personal injury and/or material damage due to unit tipping over!
Due to the high centre of gravity, the unit can tip over and cause personal injury and material damage.
– When transporting the unit, carefully observe its behaviour and stay clear of any possible hazardous areas.
Package dimensions and weights
The dimensions and weight of the individual unit types are shown in the following table.
The unit types AIR1 RH 5000-15000 are delivered in three parts. The modules of the separable units must be shipped
separately.
Unit type
No�
pkgs�
1
AIR1 RH 1500
AIR1 RH 2000
1
AIR1 RH 3000
1
AIR1 RH 5000
2
AIR1 RH 6000
2
AIR1 RH 8000
2
AIR1 RH 9500
2
2
AIR1 RH 12000
AIR1 RH 15000
2
1
AIR1 RH 1500/SO
AIR1 RH 2000/SO
1
AIR1 RH 3000/SO
1
AIR1 RH 5000/SO
2
AIR1 RH 6000/SO
2
AIR1 RH 8000/SO
2
AIR1 RH 9500/SO
2
2
AIR1 RH 12000/SO
AIR1 RH 15000/SO
2
Material damage due to excessive load!
Before off-loading the units, please ensure that the means of transport/lifting have sufficient capacity for the required
weight.
The unit can be transported using a forklift, pallet truck or crane.
m
Personal injury and/or material damage due to the unit falling from the forklift!
– Before transporting the unit, please ensure that the forks of forklift truck are long enough to lift more than the entire
underside of the unit (see Fig. 2).
– The unit can be transported using a forklift, pallet truck or crane.
– Lift the unit slowly.
Package dim� 1
Package
H x W x D (mm)
weight 1 (kg)
1552 x 1840 x 900
340
1625 x 1840 x 1000
390
1735 x 1840 x 1110
469
2005 x 750 x 1380
210
2125 x 820 x 1500
262
2375 x 910 x 1750
333
2475 x 970 x 1850
470
2625 x 1035 x 2000
532
2875 x 1080 x 2250
550
1525 x 1840 x 900
345
1625 x 1840 x 1000
396
1735 x 1840 x 1110
481
2005 x 750 x 1380
210
2125 x 820 x 1500
262
2375 x 910 x 1750
333
2475 x 970 x 1850
470
2625 x 1035 x 2000
532
2875 x 1080 x 2250
550
5
Package dim� 2
Package
H x W x D (mm)
weight 2 (kg)
2005 x 1370 x 1380
457
2125 x 1470 x 1500
561
2375 x 1540 x 1750
610
2475 x 1620 x 1850
678
2625 x 1690 x 2000
700
2875 x 1730 x 2250
1030
2005 x 1370 x 1380
473
2125 x 1470 x 1500
573
2375 x 1540 x 1750
622
2475 x 1620 x 1850
699
2625 x 1690 x 2000
724
2875 x 1730 x 2250
1030

Publicité

Table des Matières
loading

Table des Matières