Product Description And Specifications; Intended Use; Product Features; Noise Information - Bosch PCM 8 SD Notice Originale

OBJ_BUCH-2765-002.book Page 26 Tuesday, July 25, 2017 2:28 PM
26 | English
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. In this, hori-
zontal mitre angles from –48° to +48° as well as vertical bevel
angles from 45° (leftward) to 45° (rightward) are possible.
The capacity of the power tool is designed for sawing hard-
wood and softwood, as well as particle and fibre board.
The power tool is not suitable for cutting aluminium or other
non-ferrous metals or alloys.

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Slide device
2 Transport handle
3 Laser warning label
4 Lock-off button for On/Off switch
5 On/Off switch
6 Handle
7 Blade guard
8 Retracting blade guard
9 Adjustable fence
10 Material stop
11 Fixed fence
12 Saw-table extension (stationary)
13 Locking knob for various mitre angles
14 Mitre detent lever
15 Tilt protector
16 Insert plate
17 Mitre angle indicator
18 Detents for standard mitre angles
19 Scale for mitre angle
20 Mounting holes
21 Saw table
22 Quick-action clamp
23 Chip deflector
24 Roller
25 Locking screw for slide device
26 On/Off switch for laser (cutting line indication)
27 Chip ejector
28 Transport safety-lock
29 Tilt-protector bar
30 Bevel lock lever
31 Holes for quick-action clamp
32 Spindle lock
1 609 92A 3VU | (25.7.17)
33 Adjusting screw of depth stop
34 Depth stop
35 Cutting-depth scale
36 Cutting-depth indicator
37 Sliding switch for laser (cutting line indication on
left/right of saw blade)
38 Laser beam outlet
39 Right bevel angle indicator
40 Scale for bevel angle
41 Stop screw for left-hand bevel angle range
42 Stop for standard bevel angles 45°, 22.5° and 33.9°
(left)
43 Left bevel angle indicator
44 Stop screw for right-hand bevel angle range
45 Stop for standard bevel angle 45° (right)
46 Stop screw for 0° bevel angle
47 Stop for 0° standard bevel angle
48 Clamping lever of the adjustable fence
49 Hex key
50 Clamping lever of the material stop
51 Fastening screw for stationary saw-table extension 12
52 Opening for stationary saw-table extension 12
53 Dust bag
54 Hex socket screw for mounting of saw blade
55 Clamping flange
56 Saw blade
57 Interior clamping flange
58 Quick release of quick-action clamp
59 Locking knob of the quick-action clamp
60 Wing bolt of the quick-action clamp
61 Supporting bar of the quick-action clamp
62 Mounting holes for horizontal fixing
63 Saw-table extension (flexible)
64 Opening for flexible saw-table extension 63
(on the power tool)
65 Opening for flexible saw-table extension 63
(on the stationary saw-table extension 12)
66 Fastening screw for insert plate
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.

Noise Information

Sound emission values determined according to
EN 62841-3-9.
Typically the A-weighted noise levels of the product are:
Sound pressure level 93 dB(A); Sound power level
106 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Bosch Power Tools