baltur BT 320 Guide Rapide page 76

• Use the cursor keys
confirm this with enter
The display shows the valve leakage test menu.
Fig. 5-30 Submenü "Dichheitskontrolle"
1 Leakage test ON/OFF
2 Leakage test before ignition
3 Leakage test after ignition
4 Duration of leakage test
i
Access level 2 is required to set this function!
accept or discard the entry!
Activate valve leakage test prior to ignition
• Use the cursor keys
confirm this with enter
• change the ON/OFF functional state using the cursor keys
and confirm this by pressing enter
The display shows the valve leakage test prior to ignition menu.
Fig. 5-31 Valve leakage test prior to ignition menu
1 valve leakage test prior to ignition picto-gram
2 Display valve leakage test (active)
3 accept setting by pressing enter
The valve leakage test is set!
i
Access level 2 is required to set this function!
accept or discard the entry!
Check valve leakage test after flame OFF
• Use the cursor keys
confirm this with enter
• change the ON/OFF functional state using the cursor keys
to select the menu and
.
to select the menu and
.
.
to select the menu and
.
24 / 50
0006081511_201311
and confirm this by pressing enter
The display shows the valve leakage test after flame OFF menu.
Fig. 5-32 Valve leakage test after flame OFF menu
1 valve leakage test after flame OFF picto-gram
2 Display valve leakage test
3 accept setting by pressing enter
The valve leakage test is set!
i
Access level 2 is required to set this function!!
accept or discard the entry!
Set duration of valve leakage test
• Use the cursor keys
confirm this with enter
The display shows the "duration of valve leakage test" menu.
Fig. 5-33 Valve leakage test menu.
1 Duration of valve leakage test pictogram
2 Set duration of valve leakage test
3 accept setting by pressing enter
• Use the cursor keys
wish to change.
• change the value of the number with the cursor keys
.
• confirm the entry with enter
accept or discard the entry!
Activate the pilot burner in gas operation
• Use the cursor keys
confirm this with enter
• change the ON/OFF functional state using the cursor keys
and confirm this bypressing enter
.
to select the menu and
.
to select the number you
.
to select the menu and
.
.