baltur BT 320 Guide Rapide page 72

call up third page of inputs
• Use the cursor keys
confirm this with enter
The display shows "Page 3 of inputs" :
Fig. 5-16 Page 3 of inputs menu
1 Digital inputs pictogram
2 Jump to previous page
3 Jump to next page
4 Safety interlock chain oil closed [no] - terminal X06
5 Safety interlock chain gas closed [no]
6 Safety interlock chain boiler closed [no]
i
The signals in points 4 and 5 in Fig. 5-15 Page 2 of inputs
menu are "logical" signals, not "physical". The BT320/330
supports either oil or gas operation, but cannot be switched.
There-fore there are no separate signals for the oil or gas
safety interlock chain. The signal on ter-minal X06 is thus
generally known as "safety interlock chain burner".
call up fourth page of inputs
• Use the cursor keys
confirm this with enter
The display shows "Page 4 of inputs":
Fig. 5-17 page 4 of inputs menu
1 Digital inputs pictogram
2 Jump to previous page
3 Flame signal present [no] - terminal X21
4 Fault release [no] - terminal X10
5.4.8 D IGITaL OUTpUTS
check digital outputs
• Use the cursor keys
to select the next page and
.
to select the next page and
.
to select the menu and
20 / 50
0006081511_201311
confirm this with enter
The display shows "Page 1digital outputs" menu:
Fig. 5-18 page 1 digital outputs menu
1 Digital outputs pictogram
2 Jump to next page
3 Fan [on] - terminal X25
4 error [off] - terminal X24 (adjustable with p 809)
5 Ignition transformer [off] - terminal X04
call up second page of outputs
• Use the cursor keys
confirm this with enter
The display shows "Page 2 digital outputs" menu:
Fig. 5-19 page 2 digital outputs menu
1 Digital outputs pictogram
2 Jump to previous page
3 Jump to next page
4 Oil valve 1 [on] - terminal X01
5 Oil valve 2 [off] - terminal X02
6 Oil valve 3 [off] - terminal X03
call up third page of outputs
• Use the cursor keys
confirm this with enter
The display shows "Page 3 digital outputs" menu:
.
to select the next page and
.
to select the next page and
.