baltur BT 320 Guide Rapide page 56

Air & gas position at burner's ignition
1) ignition position,
2) gas servomotor position (digit),
3) air servomotor position (digit).
2
3
VA L U E S VA RY F R O M B U R N E R TO B U R N E R
!
1
Close the thermostat. the burner starts.
Pre-purge.
The controller moves the servomotors to the ignition position and excites
the ignition transformer.
If the burner starts with those settings, this page will appear:
If the burner does not start with those settings, see page 7.
4 / 50
0006081511_201311