baltur BT 320 Guide Rapide page 69

5.3 MaIN MeNU
Fig. 5-2 Display "Main menu"
1 INFOrMaTION menu path [selected]
2 Display of fuel used
3 Bar graph of internal firing-rate in % (0 - 100)
4 MaNUaL menu path
5 access level 2
6 SeTTINGS menu path
7 Window number
1.Use the cursor keys
with Enter
5.4 INFOrMaTION MeNU paTH
1.Use the cursor keys
confirm this with Enter
Fig. 5-3 Display "Menu survey"
1 Selected burner information [selected]
2 Serial number
3 Fault history
4 configuration of actual value of actuating outputs (display
only)
5 Software version
6 Digital inputs/outputs
7 check sum display
to select a menu and confirm this
to select the path and
0006081511_201311
5.4.1 B UrNer DeTaILS
Display operating hours
• Use the cursor keys
and confirm this with enter
"System Information" menu window.
Fig. 5-4 Display "System information"
1 For display of operating hours [selected]
2 Number of burner start-ups
• Use the keys
confirm with enter
The display shows the "Display operating hours" menu window.
Fig. 5-5 Display "Operating hours"
1 pictogram operating hours
2 Total number of operating hours (device connected to
mains voltage)
3 Number of operating hours, oil operation
4 Number of operating hours, gas operation
Display burner start-ups
• Use the keys in the System Information menu
select the menu
17 / 50
to select the menu
.The display shows the
to select the menu
.
and confirm this with enter
and
to
.