Dispensing Steam - Philips SAECO Talea Ring Mode D'emploi

DISPENSING STEAM

DISPENSING MAY BE PRECEDED BY SHORT SPURTS OF HOT WATER AND SCALDING
IS POSSIBLE. THE HOT WATER/STEAM SPOUT MAY REACH HIGH TEMPERATURES:
DO NOT TOUCH IT WITH BARE HANDS. USE THE APPROPRIATE HANDLE ONLY.
1
Place a container with the
beverage to be warmed up
beneath the steam spout.
4
brewing
steam
The display shows "brewing...
steam"
7
Repeat the operation to
heat another beverage.
After dispensing, clean the steam spout as described on page 30.
2
selected
steam
Press the button.
5
Heat the beverage; move the
container while heating.
3
Turn the knob to the
position.
6
the knob until it is in the rest
position ( ).
13