Installation; Starting The Machine - Philips SAECO Talea Ring Mode D'emploi

STARTING THE MACHINE

Make sure that the main power button is not pressed in the "ON" position.
1
Remove the coffee bean hopper
cover.
Fill the hopper with coffee beans.
4
Fill the tank with fresh drinking
water. Do not exceed the "max"
level indicated on the water tank.
the machine.
7
Press the main power button to the
"ON" position.
2
Close the cover pushing it down
completely.
5
Attach the female end of the power
cord to the machine. Insert the
male end into the power outlet
(see data tag).
The machine automatically
primes the water circuit.
The machine is now ready for
use.
TO ASSESS WATER HARDNESS, SEE "WATER
HARDNESS MENU" ON PAGE 20.

INSTALLATION

3
Remove the water tank. We
recommend installing the "Aqua
6
Place a container beneath the hot
water spout.
Water may not be dispensed
into the container.
This should not be considered a
malfunction.
5