Novatech TONN Mode D'emploi page 22

English
22
6. Rotate the clamping rod 90° to lock the clamping rod. The wings should
be aligned vertically.
7. Close the folding device. Closure of the folding device is indicated by the
locking mechanism snapping into place, which can be felt and heard.
Ensure that the entire stent is inside the folding device.
8. Rotate the clamping rod 90° to unlock the clamping rod. The wings
should be aligned horizontally.
9. Remove the closed folding device from the basic block. Pull out the
clamping rod from the folding device.