Maintenance Chart - Hitachi N2503AF Mode D'emploi Et Consignes De Sécurité

MAINTENANCE CHART

ACTION
Drain air line filter daily
Keep lubricator filled.
Clean filter element - then blow air
through filter in direction opposite to
normal flow.
Clean magazine and feeder
mechanism.
Keep safety trigger working properly.
Lubricate the Tool after use.
Drain air compressor.
WHY
Prevent accumulation of moisture and dirt.
Keep the Tool lubricated.
Prevent clogging of filter with dirt.
Prevent a jam.
Promote operator safety and efficient Tool operation.
Extend the life of the Tool.
Keep the Tool operating properly.
15
HOW
Open manual petcock.
Fill with Hitachi pneumatic tool
lubricant.
Follow manufacturer's instructions.
Blow clean daily.
Blow clean daily.
Supply 5-10 drops of lubricant into the Tool.
Open petcock on air compressor tank.
English