Maintenance And Inspection; Service And Repairs - Hitachi N2503AF Mode D'emploi Et Consignes De Sécurité

NOTE:
The information contained in this Manual is designed to assist you in the safe maintenance of the Stapler.
Some illustrations in this Manual may show details or attachments that differ from those on your own Stapler.

MAINTENANCE AND INSPECTION

Read section titled "SAFETY" (page 4-7)
WARNING
Disconnect air hose and remove all Staples from Stapler
•
when:
1) doing maintenance and inspection; and
2) clearing a jam.
1) Inspecting the Magazine
DISCONNECT THE AIR HOSE
•
Clean the magazine. Remove dust or wooden tips which may
•
have accumulated in the magazine.
2) Storing
When not in use for an extended period, apply a thin coat of
•
the lubricant to the steel parts to avoid rust.
Do not store the Stapler in a cold weather environment.
•
When not in use, the Stapler should be stored in a warm and
dry place.
Keep out of reach of children.
•
3) Warning Label
Change the WARNING LABEL if missing or damaged. A new
•
WARNING LABEL is available from a Hitachi Authorized
Service Center.
WARNING
LABEL
4) Maintenance Chart (see page 15)
5) Operator Troubleshooting (see page 16)
MAINTENANCE
6) Service Parts List
A. Item No.
•
B. Code No.
•
C. Description
•
Repair, modification and inspection of Hitachi Power Staplers
must be carried out by an Hitachi Authorized Service Center.
This Parts List will be helpful if presented with the Stapler to
the Hitachi Authorized Service Center when requesting repair
or other maintenance. In the operation and maintenance of
power Staplers, the safety regulations and standards
prescribed in each country must be observed.
MODIFICATIONS
Hitachi Power Tools are constantly being improved and modified
to incorporate the latest technological advancements.
Accordingly, some parts (i.e.: code numbers and/or design) may
be changed without prior notice.

SERVICE AND REPAIRS

•
•
All quality Staplers will eventually require servicing or
replacement of parts because of wear from normal use.
In order to achieve the optimal performance of the N2503AF
Pneumatic Flooring Stapler preventative maintenance is
recommended.
NOTE:
Specifications are subject to change without any obligation on
the part of HITACHI.
14
CAUTION
WARNING
Only service personnel trained by Hitachi, distributor or
employer shall repair the Stapler.
Use only Hitachi parts supplied or recommended by
Hitachi for repair.
English