Ec Declaration Of Conformity - Cemo Cube-Tank Informations Techniques

GB

10. EC Declaration of Conformity

The manufacturer / distributor
CEMO GmbH
In den Backenländern 5
D-71384 Weinstadt
hereby declares that the following product
Product designation:
Model designation:
Type designation:
Serial numbers:
Description:
Container for the safe storage of fluids, including substances hazardous to water (in Germany, for example, according
to German Water Hazard Classes (WGK) 1, 2, and 3) and flammable fluids with a flash point of > 55°C, and the filling
therefrom (also suitable for use in water conservation areas due to the principally double-walled design).
complies with all relevant specifications of the applicable regulations (below), including any amendments applicable at
the time of the declaration. The manufacturer bears sole responsibility for issuing this declaration of conformity. This
declaration refers only to the machine in the condition in which it was brought onto the market; any parts subsequently
attached and/or any interventions subsequently made by the end user are not taken into consideration.
The following legislation has been applied:
The protection targets of the following additional legislation have been complied with:
The following harmonised standards have been applied:
EN 547-3:1996+A1:2008
EN 60204-1:2018
EN 809:1998+A1:2009/AC:2010
EN IEC 63000:2018
EN ISO 12100:2010
EN ISO 13854:2019
EN ISO 13857:2019
EN ISO 19353:2019
Name and address of legal entity authorised to compile the technical documentation:
CEMO GmbH, In den Backenländern 5, 71384 Weinstadt, Germany
Location: Weinstadt
Date: 10/06/2022
_______________________________
(Signature)
Eberhard Manz, Managing Director
32
Filling station (Diesel, AdBlue, lubricant)
CEMO
CUBE-Tank
10292-10299, 10301-10306, 10308-10313, 10420, 10424, 10434-10436, 10466,
10736, 10778, 10780, 11087-11089, 11036, 11037, 11038, 11030, 10920, 11028,
11029, 11078, 11079, 11080, 11086, 11140, 11141, 11165, 11320-11322, 11339,
11340, 11323, 11324
Safety of machinery - Human body measurements - Part 3: Anthropometric data
Safety of machinery - Electrical equipment of machines - Part 1: General require-
ments (IEC 60204-1:2016 (modified))
Pumps and pump units for liquids - Common safety requirements
Technische Dokumentation zur Beurteilung von Elektro- und Elektronikgeräten
hinsichtlich der Beschränkung gefährlicher Stoffe (IEC 63000:2016)
Safety of machinery - General principles for design - Risk assessment and risk
reduction (ISO 12100:2010)
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
(ISO 13854:2017)
Safety of machinery - Safety distances to prevent hazard zones being reached by
upper and lower limbs (ISO 13857:2019)
Safety of machinery - Fire prevention and fire protection (ISO 19353:2019)
Machinery Directive 2006/42/EC
RoHS Directive 2011/65/EU