Usb Playback; Error Displays/Messages - Sony CDX-GT710HD Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

– Perform manual tuning.
The sound skips or repeats.
 This may happen while this unit switches from
analog signal to digital signal or vice versa,
because the radio station does not synchronize
the signal.
CD playback
The disc cannot be loaded.
 Another disc is already loaded.
 The disc has been forcibly inserted upside
down or in the wrong way.
The disc does not play back.
 Defective or dirty disc.
 The CD-Rs/CD-RWs are not for audio use
(page 27).
MP3/WMA/AAC files cannot be played back.
 The disc is incompatible with the MP3/WMA/
AAC format and version. For details on
playable discs and formats, visit the support
site.
MP3/WMA/AAC files take longer to play back
than others.
 The following discs take a longer time to start
playback.
– A disc recorded with a complicated tree
structure.
– A disc recorded in Multi Session.
– A disc to which data can be added.
The display items do not scroll.
 For discs with very many characters, those may
not scroll.
 "AUTO SCR" is set to "OFF."
– Set "A.SCRL-ON" (page 25).
– Press and hold  (SCRL).
The sound skips.
 Installation is not correct.
– Install the unit at an angle of less than 45° in
a sturdy part of the car.
 Defective or dirty disc.

USB playback

You cannot play back items via a USB hub.
 This unit cannot recognize USB devices via a
USB hub.
Cannot play back items.
 A USB device does not work.
– Connect it again.
A USB device takes longer to play back.
 The USB device contains files with a
complicated tree structure.
The sound is intermittent.
 The sound may be intermittent at a high-bit-
rate of more than 320 kbps.
Pandora® connection is not possible.
 Shut down Pandora® application on the mobile
device, and then launch again.

Error displays/Messages

CHECKING
 The unit is confirming the connection of a
USB device.
– Wait until confirming the connection is
finished.
ERROR
 The disc is dirty or inserted upside down.
– Clean or insert the disc correctly.
 A blank disc has been inserted.
 The disc cannot play due to a problem.
– Insert another disc.
 USB device was not automatically recognized.
– Connect it again.
 Press  to remove the disc.
FAILURE
 The connection of speakers/amplifiers is
incorrect.
– See the installation/connections manual of
this model to check the connection.
HUB NO SUPRT (Hubs Not Supported)
 USB hub is not supported on this unit.
31

Publicité

Chapitres

Table des Matières
loading

Table des Matières