Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4
Rotate the control dial to select "1," "2"
or "3," then press it.
5
Press
(BACK) to return to the
previous display.
For details on the settings for the subwoofer
phase, position, low pass filter frequency
and the low pass filter slope, see page 24.

Adjusting setup items

1
Press , rotate the control dial
until the desired category appears, then
press it.
2
Rotate the control dial until the desired
item appears, then press it.
3
Rotate the control dial to select the
setting, then press it.*
The setting is complete.
4
Press
(BACK) to return to the
previous display.
* For CLOCK-ADJ and BTM settings, step 4 is
not necessary.
The following items can be set depending
on the source and setting:
GENERAL:
CLOCK-ADJ (Clock Adjust) (page 5)
CAUT ALM*
(Caution Alarm)
1
Activates the caution alarm: "ON,"
"OFF" (page 5).
BEEP
Activates the beep sound: "ON," "OFF."
AUTO OFF
Shuts off automatically after a desired
time when the unit is turned off: "NO,"
"30S (Seconds)," "30M (Minutes)," "60M
(Minutes)."
AUX-A*
(AUX Audio)
1
Activates the AUX source display: "ON,"
"OFF" (page 25).
BTM*
(page 9)
2
TAG DEL*
(Tag Delete)
2
Confirms deleting tags: "YES," "NO"
(page 11).
ZAPPIN*
3
ZAP TIME (Zappin Time)
Selects the playback time for the
ZAPPIN function.
– "Z.TIME-1 (about 6 seconds),"
"Z.TIME-2 (about 15 seconds),"
"Z.TIME-3 (about 30 seconds)."
ZAP BEEP (Zappin Beep)
Applies a beep sound between track
passages: "ON," "OFF."
PARENTAL*
4
Sets the parental lock to "ON" or "OFF,"
and edits the passcode (page 26).
*1 When the unit is turned off.
*2 When the tuner is selected.
*3 When the CD or USB is selected.
*4 When the SiriusXM Vehicle Tuner is
connected.
SOUND:
EQ7 PRESET (page 20)
EQ7 SETTING (page 20)
POSITION
SET F/R POS (Set Front/Rear Position)
(page 21)
ADJ POSITION*
(page 22)
SET SW POS*
(Set Subwoofer Position)
1
(page 21)
BALANCE
Adjusts the sound balance: "RIGHT-15"
– "CENTER" – "LEFT-15."
(Adjust Position)
1
23

Publicité

Chapitres

Table des Matières
loading

Table des Matières