Auxiliary Contact - Eaton CROUSE-HINDS Série Mode D'emploi

1 Technical data
Cable entry:
Wall socket
Suitable cables and test torques of the pressure screw (Ømm/Nm)
(Default plastic KLE GHG960)
Seal 1+2+3
Seal 1+2
Seal 1
Test torque for screw in thread cable entry (Nm)
(2)
The tests of clamping ranges and torque values were performed with metal mandrel. The clamping range can vary by using cables with different manufacturing tolerances
and material properties. Please use a suitable combination of seals in the intermediate area, so that the cap nut can be tightened in future maintenance work on the cable
entry.
Suitable cables
Wall socket / Flange socket
Plug
Coupler
Plug / Coupler
Plug / Coupler
Plug GHG 543/531
(3)
only with pin cable lugs
(4)
observe
Perm. ambient temperature!
Test torques:
Supply terminals
Cover screws
Terminals
Mounting screws flange socket
Self-cutting screws size 4
Locking screw for pressure piece GHG 54
Weight:
Wall socket 3-pole GHG 511 43
Plug 3-pole GHG 511 73
Coupler 3-pole GHG 511 33
Flange socket 3-pole GHG 511 83
Wall socket 4-pole GHG 511 44
Plug 4-pole GHG 511 74
Coupler 4-pole GHG 511 34
Flange socket 4-pole GHG 511 84
Wall socket 5-pole GHG 511 45
Plug 5-pole GHG 511 75
Coupler 5-pole GHG 511 35
Flange socket 5-pole GHG 511 85
1.1

Auxiliary contact

Auxiliary contact, rated voltage:
Auxiliary contact, rated current:
Explosion protected plug and socket system 16 A,
3-pole, 4-pole, 5-pole, GHG 511
2 x M25
min.
1 2
3
max. (2)
min.
1 2
3
max. (2)
min.
1 2
3
max. (2)
3-pole
3-pole
4-pole
5-pole
Wall socket / Flange socket
Coupler
Plug
250 VAC
AC / 5 A
(catalogue version)
1 x M25 + 1 x screwed blanking plug
M20 M25
5.5/1.5 8.0/1.5
7 .0/1.0 10.0/2.0
7 .0/1.5 10.0/2.3
9.0/1.4 13.0/2.6
9.5/1.0 13.5/1.3
13.0/1.7 17 .5/2.3
2.7 3.0
Supply terminals /
Clamping range:
2 x 1.5 - 4.0 mm
Ø 8 - 18 mm 1 x 1.5 - 4.0 mm²
Ø 8 - 19 mm 1 x 1.5 - 4.0 mm²
Ø 8 - 21 mm 1 x 1.5 - 4.0 mm²
Ø 12 - 21 mm 1 x 1.5 - 4.0 mm²
Ø 9 - 17 mm 1 x 1.0 - 4.0 mm
2,5 Nm
2,5 Nm
1,5 Nm
2.5 Nm
2.5 Nm
1.6 Nm
1.6 Nm (Page 15: Fig. 3; Pos. 3)
1.6 Nm
(catalogue version)
approx. 1.10 kg
approx. 0.27 kg / GHG 543 - approx. 0.23 kg
approx. 0.61 kg
approx. 0.38 kg
approx. 1.50 kg
approx. 0.34 kg / GHG 531 - approx. 0.40 kg
approx. 0.89 kg
approx. 0.53 kg
approx. 1.55 kg
approx. 0.38 kg / GHG 531 - approx. 0.41 kg
approx. 0.89 kg
approx. 0.58 kg
DC / 0.03 A
M32
14.0/3.0
17 .0/4.0
17 .5/1.5
21.0/1.3
5.0
Stripped wire length
10 mm
2
(3) (4)
9 mm
(3)
10 mm
(3) (4)
9 mm / 10 mm
(3) (4)
9 mm / 10 mm
8 mm
2
GB
9 9