Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
menu
Press
for 2 seconds, then
(on) or deactivate (OFF) simulation using the
Press
to exit setup mode, or time out after 10 seconds.
2.4.4. Key beeps
The key beeps can be activated or deactivated.
menu
Press
for 2 seconds, then
(on) or deactivate (OFF) the beep using the
Press
to exit setup mode, or time out after 10 seconds.
2.4.5. Resetting data in the memory
At any time, the memory of the Depth display can be returned to factory settings. To
do so, a memory reset command is accessible in the menu. The following parameters
are restored in the memory:
Depth unit:
Keel offset:
Depth alarms:
Battery alarm:
Countdown timer init.:
Simulation mode:
Backlighting level:
menu
until the "SIMUL" page is displayed, then activate
2 seconds
menu
until the "bIP" page is displayed, then activate
2 seconds
Metres
0
deactivated, high and low threshold at 0
deactivated, low threshold at 0
10 minutes
deactivated
0 (OFF)
Installation and Operation Manual S400 series
and
keys.
and
keys.
12
Publicité
Chapitres
Table des Matières
