Components Supplied With Your Depth S400; Technical Characteristics - ADVANSEA DEPTH S400 Manuel Utilisateur

To do so, it is supplied with 2 connection cables:
1 connector-free cable for the power supply, the bus, the NMEA IN & OUT, the alarm
output
1 RCA cable for connection to the sounder sensor
The Depth S400 is part of the S400 advanSea family of navigation instruments,
including instruments for measuring speed, depth, and wind. They may be connected
together to form an integrated data system for a boat (see chapter 2.6).
1.2. Components supplied with your Depth
S400
The Depth S400 comes with (as standard):
-
-
-
-
The Depth S400 does not come with sensors. You can order complete kits, or
consult our website www.advanSea.com.
You will also find a complete list of accessories at

1.3. Technical characteristics

Measurement characteristics
Sounder:
Battery voltage:
protective cover
user manual
warranty card
adhesive rear sealing joint for flush mounting
Measurement range: from 0.5 to 199 meters
Operating frequency: 200 kHz
Accuracy: ±0.1 meter up to 5.0 meters and ≤2% beyond 5.0
meters (this accuracy is given for a constant sound speed in
water of 1490 m/s)
Resolution: 0.1 from 0 to 19.9 and 1 beyond
Configurable offset: ±9.9 meters
Measurement range: from 10.0V to 16.5V
Accuracy: ±0.2V
Resolution: 0.1V
Installation and Operation Manual S400 series
www.advanSea.com
4