ADVANSEA DEPTH S400 Manuel Utilisateur page 10

2.3.1. Setting the depth alarm thresholds
Deep depth alarm setting:
menu
Press , then once again on
for the sounder, then adjust the required value of the threshold using the
keys.
Press to exit setup mode, or time out after 10 seconds.
Shallow depth alarm setting:
menu
Press , then once again on
for the sounder, then adjust the required value of the threshold using the
keys.
Press to exit setup mode, or time out after 10 seconds.
menu
to display the " DEPTH HI " high threshold page
2 seconds
menu
to display the " DEPTH Lo" low threshold page
2 seconds
Installation and Operation Manual S400 series
and
and
9