Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
To adjust this offset:
menu
Press
for 2 seconds, then on
adjust the required value using the
Press
to exit setup mode, or time out after 10 seconds.
2.4.2. Configuring the countdown timer
The duration of the countdown can be configured to the nearest minute, between 1
and 10 minutes.
menu
Press
for 2 seconds, then on
adjust the required value using the
Press
to exit setup mode, or time out after 10 seconds.
2.4.3. Simulation mode
Simulation mode can be accessed via the Configuration menu. This mode is shown by
the icon
off. It may be used for sales demonstrations of the product and features the following
functions:
Displays a coherent bottom profile (in distance and variation),
Displays the real supply voltage,
Transmits simulated data via the NMEA output.
Transmits simulated data via the communication bus.
menu
2 seconds
menu
2 seconds
flashing on the LCD and remains active after power has been cut
Installation and Operation Manual S400 series
until the "CAL" offset page is displayed, then
and
keys.
until the "tim" setup page is displayed, then
and
keys.
11
Publicité
Chapitres
Table des Matières
