Spark Plug Replacement; Storing The Product - Ryobi Rlt430Cesb Manuel D'utilisation

performance improves when the fuel cap is loosened, check valve
may be faulty or filter clogged. Replace fuel cap if required.

SPARK PLUG REPLACEMENT

See Figures 22.
This engine uses a Torch CMR7A or Champion RY4C spark plug
with 0.6mm electrode gap. Use an exact replacement and replace
annually.

STORING THE PRODUCT

 Clean all foreign material from the product. Store idle unit
indoors in a dry, well-ventilated area that is inaccessible to
children. Keep away from corrosive agents such as garden
chemicals and de-icing salts.
 Abide by all ISO and local regulations for the safe storage
and handling of petrol.
When storing 1 month or longer:
 Drain all fuel from tank into a container approved for petrol.
Run engine until it stops.
WARNING:
Inspection after dropping or other impacts:
Thoroughly inspect the product and identify
any affections or damage with it. Any part that
is damaged should be properly repaired or
replaced by an authorized service centre.
English(Original instructions)
21