Care And Storage; In The Event Of Problems - Beurer Shiatsu FM 39 Mode D'emploi

8. Care and storage

CLEANING
WARNING
• Disconnect the device before cleaning it.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the device
or accessories.
• Clean the device with a slightly damp cloth. If it is very dirty, you can also moisten the cloth with a
mild soapy solution.
• Small marks can be removed using a cloth or damp sponge, and some liquid delicate laundry detergent
where necessary. Do not use any solvent-based cleaning products.
• Do not use the device again until it is completely dry.
Storage
If you do not use the device for longer periods, we recommend storing it in the original packaging in a dry place
without weighting it down.

9. In the event of problems

Problem
Massage heads
rotating at
reduced speed.
Massage heads
not moving.
Cause
The load on the massage
heads is too great.
Appliance not connected to
the power supply.
Overheating protection
tripped.
Remedy
Release the massage heads.
Connect the plug to the mains supply and switch on
the appliance.
Disconnect the device from the power supply, wait at
least 15 minutes, then plug in again and switch on.
11