Appliance Description; Start-Up; Operation - Beurer Shiatsu FM 39 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
Handling
CAUTION
Switch the device off and disconnect the power supply after every use and before every cleaning.
• Never sit or stand on the moving parts of the device with all your weight and do not place objects on
the device.
• Keep the device away from high temperatures.
Disposal
CAUTION
For environmental reasons, do not dispose of the device in the household waste at the end of
its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the
device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment).
If you have any questions, please contact the local authorities responsible for waste disposal.

5. Appliance description

Shiatsu foot massager
3

6. Start-up

• Remove the packaging.
• Check the device, power supply and cables for damage.
• Connect the device to the mains power supply.
• Route the cable safely so that there is no risk of anyone tripping over it.

7. Operation

When seated comfortably place your feet on the two platforms.
prevent it from sliding.
Switch on the massager with the ( ) button. Press the ( ) button again to activate the heat function. Press the
( ) button repeatedly to switch the device off.
The massage must be pleasant and relaxing at all times. Stop the massage or change your position or the contact
pressure if you find it is painful or unpleasant.
Note
• Do not use the massage device for longer than 15 minutes. Otherwise, using the device for longer can
over-stimulate the muscles and cause tension instead of relaxation.
Massage of a specific point on the sole of the foot may influence the corresponding organ of the body.
However, we recommend studying relevant literature and asking your doctor before using point reflex
zone massage to achieve the desired effect.
1
2
1. Platform with 3 massage heads that rotate in
opposite directions.
2. Button ( )
Press 1x: Shiatsu massage
Press 2x: activates the heat function
Press 3x: off
3. Mains plug
The rubber feet on the base of the unit
10

Publicité

Table des Matières
loading

Table des Matières