Wet/Moist/Dry" Indicator; Maintenance And Cleaning - VOLTCRAFT 40 92 36 Notice D'emploi

d) "Wet/Moist/Dry" Indicator
The LC display additionally shows an indicator scale "5".
This permits quick measurement if no precise % values are required.
The indicator values can be changed via the setting mode.
For the values, see chapter 9, b.
We recommend a value of 70 for "DRY" and 850 for "WET".

12. MAINTENANCE AND CLEANING

The meter requires no servicing apart from replacing the rechargeable battery.
Never clean the product while it is switched on.
A slightly moist, soft and clean cloth is suffi cient for cleaning.
Clean the measuring prods at once after each use. This may cause measuring tolerances
otherwise.
Do not use any aggressive cleaning agents. Do not push the surface and LC display too much
when cleaning the housing to avoid scratches.
40