Invacare Aquatec Pure Manuel D'utilisation page 20

Aquatec® Pure Bidet
If the cleaning functions are repeatedly started, the water
temperature drops gradually. To regain the desired water
temperature, suspend the cleaning function for three
minutes. The last value of the water temperature is
automatically saved by the device.
Setting seat temperature
The seat temperature can be set in four steps:
Press SEAT button G repeatedly on the remote control, until
1.
the desired temperature is reached.
•
The seat temperature is displayed on the LED display above.
The last value of the seat temperature is automatically saved
by the device.
The seat is equipped with an internal combustion protection system.
If the seat temperature is set to "High" and you remain longer than
30 minutes on the seat, the seat temperature drops automatically. As
soon as you leave the seat, the temperature returns to the setpoint.
Setting warm air temperature
The warm air temperature can be set in five steps:
20
1. Press DRY button E on the remote control.
2. Press HIGH respectively LOW button J on the remote control.
•
The temperature of the warm air dryer is raised or lowered
by one step and displayed on the LED A.
The last value of the warm air dryer temperature is
automatically saved by the device.
Turning on/off night-light LED
1. Press LIGHT button M on the units control panel.
•
The night-light is activated when it gets dark in the room.
When the night light is activated, the device automatically
recognizes the toilet light and the night light is turned off.
The User can conveniently bidet without toilet light. The
power consumption of the night-light is very low.
2. Press LIGHT button again to switch off the night-light.
Automatic power saving mode
1. Press POWER SAVING button L repeatedly, until "AUTO"
LED Q illuminates.
•
Seat temperature is automatically set at 30 °C
Auto power saving function is temporarily released, when
sitting on the seat. Auto power saving function runs again,
when moving away from the seat.
2. Press POWER SAVING button twice.
•
Power saving mode deactivates and "AUTO" LED turns off.
Super power saving mode
Bidet senses toilet luminosity for itself and shows excellent power
saving function.
1590625-A