Delta Q MINIQOOL Manuel D'instructions page 45

RESET FACTORY SETTINGS/ PURGING/
CLEANING AND MAINTENANCE
RESET FACTORY SETTINGS
When in the ready to use mode, press buttons A and C at the
same time for more than 3 seconds.
All of the buttons will flash 3 times.
The machine will return to the factory settings.
The machine returns to First Use.
PURGING
Purging the system frequently ensures the quality of the extracted
drinks and the correct maintenance of the device.
Place a cup under the nozzle and press the long drinks extraction
button/water button/purge to rinse the machine without inserting
a capsule. The extraction will stop automatically. When the LED
light stops flashing, the machine is Ready to Use.
CLEANING AND MAINTENANCE
Ensure the device is unplugged before cleaning.
To avoid electric shock, do not immerse the lead, plug or device in water or any other liquid.
Do not use abrasive or solvent-based cleaning agents.
Cleaning the drip tray and used capsule container
Remove the drip tray and used capsule container.
Remove and empty the used capsule container.
The used capsule container and drip tray can be washed in
water and dried with a soft cloth.
Clean the outer surfaces of the machine with a
damp cloth.
Never immerse the machine in water.
Empty the used capsule container regularly to prevent damage to the machine and poor functioning.
— 43 —
EN
A B C
Ready to use mode
A B C
C