Functional Description; Name Of Parts; Specifications - Hitachi DH 30PB Instructions De Sécurité Et Mode D'emploi

FUNCTIONAL DESCRIPTION

NOTE:
The information contained in this Instruction Manual is designed to assist you
in the safe operation and maintenance of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first
read and understood all safety instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments
that differ from those on your own power tool.

NAME OF PARTS

Drill Bit

SPECIFICATIONS

Model
Motor
Power Source
Current
Capacity
No-Load Speed
Full-load Impact Rate
Weight
Stopper
Change Lever
Grip
Side Handle
Housing
Set Screw
(Under the Tail Cover)
Single-Phase, Series Commutator Motor
Concrete: 5/32" – 1-3/16" (4mm – 30mm)
Steel:
Wood:
Nameplate
Tail Cover
Brush Cap
(Inside the Tail Cover)
Fig. 1
DH30PB
Single-Phase, 120V 60Hz
7.4A
1/2"(13mm)
1-1/4" (32mm)
0 – 850/min.
0 – 3700/min.
10.4 lbs (4.7 kg)
English
Trigger
Handle
DH30PC
10.6 lbs (4.8 kg)
9