Hitachi DH 30PB Instructions De Sécurité Et Mode D'emploi page 23

4. Demolishing operation (Striking only)(DH30PC)
Bull point (Round type) (SDS-plus shank)
Code No. 303046
Bull point (Square type) (SDS-plus shank)
Code No. 316656
5. Groove digging and edging (Striking only)(DH30PC)
Cold chisel (SDS-plus shank)
Code No. 316657
Cutter (SDS-plus shank)
Code No. 316658
6. Grooving (Striking only)(DH30PC)
Grooving Chisel (SDS-plus shank)(DH30PC)
Code No. 316659
7. Bolt placing operation with Chemical Anchor. (Rotation + Striking)
(
Standard socket
on the market
)
(SDS-plus shank)
1/2" (12.7 mm) Chemical
Anchor Adapter
(Code No.303044)
3/4" (19 mm) Chemical
Anchor Adapter
(Code No. 303045)
English
23