Functional Description; Name Of Parts; Specifications - Hitachi DH 50SB Instructions De Sécurité Et Mode D'emploi

FUNCTIONAL DESCRIPTION

NOTE: The information contained in this Instruction Manual is designed to assist you in
the safe operation and maintenance of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first read
and understood all safety instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments that
differ from those on your own power tool.

NAME OF PARTS

Tool holder
D type handle

SPECIFICATIONS

Motor
Power Source
Current
Capacity
No-Load Speed
Full-load Blow
Weight
Switch trigger
Housing
Set screw
Cap cover
Fig. 1
Single-Phase, Series Commutator Motor.
Single-Phase, 120 V 60 Hz
10 A
Drill Bit: 2" (50 mm)
Core Bit: 5" (125 mm)
300/min
2,450/min
19.2 lbs (8.7 kg)
Bar type handle
Nameplate
Brush cap
(under the cap cover)
English
9