Elcometer Sagola MINI XTREME MIX Manuel D'utilisation page 38

an Elcometer company
20. Conformity Declaration
Manufacturer: SAGOLA, S.A.U.
Address: Urartea, 6 • 01010 VITORIA-GASTEIZ (Álava) SPAIN
Hereby declares that the product: MIX SPRAY GUN
Brand: SAGOLA
Range: MINI XTREME MIX
Versions:
UE Conformity declaration
In accordance with the Esential Security Provisions on the Annex of the Directive 2014/34/UE and it
can be used in potentially explosive atmospheres (ATEX).
The product conforms with the standards:
• Directive of machines (2006/42/CE) and the corresponding transposition into national law 1644/2008.
• EN 1953:2013 - Atomising and spraying equipment for coating materials. Security requirements.
• UNE-EN 12100:2012 - Machine safety. General principles for design. Risk assessment and risk
reduction.
• UNE EN-1127-1:2020
- Prevention and protection against explosion.
- Part 1: Basic concepts and methodology.
These also meets the following Directive and Regulations:
ATEX Directive (Directive 2014/34/UE)
Protection Level II 2G Suitable for use in Zones 1 and 2
"X"marking. The equipment must be connected to ground. All static electricity is discharged through air
pipes. The air hoses must be "STATIC-FREE"
• UNE EN ISO 80079-36:2017 / AC:2020
- Non electrical equipment used for potentially explosive atmospheres.
UKCA Conformity declaration
In accordance with the Esential Security Provisions on the Annex of the Directive
2016 No1107 and it can be used in potentially explosive atmospheres (ATEX).
The product conforms with the standards:
• Directive of machines (UKSI 2008 No.1597).
• BS EN 1953:2013 - Atomising and spraying equipment for coating materials. Security requirements.
• BS EN-1127-1:2012. Prevention and protection against explosion. Part 1: Basic concepts and methodology.
These also meets the following Directive and Regulations:
ATEX Directive (Directive UKSI 2016 No 1107)
Protection Level II 2G Suitable for use in Zones 1 and 2
"X"marking. The equipment must be connected to ground. All static electricity is discharged through air
pipes. The air hoses must be "STATIC-FREE"
BS EN 80079-36:2016. Explosive atmospheres. Non-electrical equipment for explosive atmospheres.
Basic method and requirements.
Full technical documentation and service instructions are available for 10 years.
In Vitoria-Gasteiz on 01/01/2024
EN 38
II 2G T4 x
Signed:
Enrique Sánchez Uriondo
Technical Manager
II 2G T4 x
www.sagola.com