Elcometer Sagola MINI XTREME MIX Manuel D'utilisation page 26

an Elcometer company
Extreme climate
fan pattern
Critical
climate
fan pattern
Standard Optimum
fan fan
pattern pattern
08. Functional description of the unit
The SAGOLA gun model MINI XTREME MIX can be used for applying appropriately diluted products
used widely in the wood industry, plastics,..
The MINI XTREME MIX gun is a manual MIXED gun for professional use only.
This gun can be mounted according to the working pressure: (Spring yellow up to 120 bar/1,740 psi or
spring red up to 200 bar/2,900 psi).
It's a spray gun with adjustable fan pattern and a swivel coupling.
Spray gun recommended for spraying: is suitable for funds and finishes of 1K and 2K materials
in solvented or wated-based products.
09. Start-up
Before each start-up and especially after cleaning or repairing the unit, a check must be made that all
its elements are securely tightened.
If maintenance or repair work is to be carried out, the gun must be depressurised before work
begins (without air pressure). Should this safety measure not be observed, this may lead to
malfunctions, personal injury and accidents, which may prove to be fatal. SAGOLA S.A.U. does
not accept any responsibility for the consequences of any non-compliance with these safety regulations.
EN 26
Extreme climate conditions: The use of additives in the paint may be
•
required (see paint manufacturer specifications).
Recommendations:
•
- Increase the peak size from 0.1 to 0.2 mm. compared to the one used in
normal conditions.
- Reduce the size of the fan by making it more rounded and with a central
core more loaded with product.
Critical climate conditions: The use of additives in the paint may be
•
required (see paint manufacturer specifications). Reduction of the fan and
increase of the spray core in a critical climate.
• Recommendations:
- Reduce the dynamic pressure between 0.2 and 0.5 bar compared to that
used in normal conditions.
- Increase the size of the peak from 0.1 to 0.2 compared to that used in
normal conditions.
- Increase the product load in the central core of the fan.
• Non-critical climate conditions: The use of additives in the paint may be
required (see paint manufacturer specifications).
Recommendations: Standard fan pattern.
•
• Optimum climate conditions:
• Recommendations: Optimum fan pattern.
www.sagola.com