Elcometer Sagola MINI XTREME MIX Manuel D'utilisation page 35

In general, precautions must be taken whenever the gun is handled, in order to prevent any
damage to this.
Connectors must be securely tightened and in good condition. If pneumatic connectors are
fitted, they must comply with the standard ISO 4414:2010.
Safety standards must be understood and applied.
Any non-compliance with the indications set out in this manual may lead to incidents affecting the
physical integrity of the user or other personnel or animals.
Respect and comply with indications relating to the conservation of the environment.
Always keep the safety sheets for the products to apply and the cleaning liquids to hand in case you
need to consult them.
16. Observations
By following the instructions set out in this manual you will ensure good spraying and quality of finish.
Should you have any doubt, please contact the Technical Service of SAGOLA.
17. Warranty Conditions
This device has been manufactured with great precision and has been subjected to a large number of
controls before leaving the factory.
The WARRANTY is valid for 3 years, counted as of the date of purchase, which will be indicated by the
seller in the place provided for this purpose, together with his stamp. Once the unit has been received,
please complete the warranty and send this to the manufacturer for validation
This WARRANTY covers any manufacturing defect, which will be repaired without charge. However,
any malfunction resulting from the incorrect use of the unit, such as inadequate connections, breakage
due to dropping, or similar, the normal wear of components and in general any deficiency not
attributable to the manufacturer of the device, are expressly excluded. Likewise, the WARRANTY shall
be rendered null and void when it is evident that the unit has been handled by persons other
than our Technical Assistance Service.
This WARRANTY does not support any undertaking made by anyone outside our Technical
Service.
In the case of any breakdown during the guarantee period, please attach the completed warranty
certificate to the unit and deliver this to the nearest Technical Assistance Service or get in touch with
the factory.
Any demand of greater importance against the supplier, in particular compensation for damages, is
excluded. This is also applicable to any damages that might arise during counselling, while acquiring
practice and during demonstration.
Consequently, the services rendered under guarantee do not involve an extension of the warranty
period.
The manufacturer reserves the right to make technical modifications.
18. Disposal
For complete and correct disposal of the gun, when it has reached the end of its
useful life, it must be completely dismantled so it can be recycled, separating the metal
and the plastic components.
www.sagola.com
an Elcometer company
EN 35