Elcometer Sagola MINI XTREME MIX Manuel D'utilisation page 30

an Elcometer company
11.3. Assembly lip seal in aircap
01 02
1.- Remove the TIP 2.- Place the washer
from the aircap inside the aircap
05 06
5.- Lip seal placed 6.- Tighten the aircap
inside the aircap tightly until the lip seal
is inserted into the
nozzle
EN 30
03
Plain washer
Ø10.5 DIN433
3.- Washer placed
inside the aircap
07 08
7.- Threaded aircap 8.- Remove the
in the spray gun aircap
04
4.- Place the lip seal in
the indicated position
09
9.- Finish manually
inserting the lip seal into
the slot nozzle
www.sagola.com