Elcometer Sagola MINI XTREME MIX Manuel D'utilisation page 28

an Elcometer company
10. Mixed nozzle chart (Tips)
Recommended
application
FINISHES
LACQUERS
ENAMELS
UNMOLDED
ACRYLIC
URETHANES
FONDS
AND PRIMERS
FONDS
AND PRIMERS
FONDS
ANTICORROSIVE
PRIMERS
HIGH VISCOSITY
PRODUCTS
Both the product contribution and the fan size in the pressure guns are directly related to the product
pressure set by the user, the product viscosity and the characteristics of the hose. Therefore, a reference
value cannot be established.
11. Maintenance
In order to carry out maintenance, repairs or cleaning, first disconnect the unit from the compressed
air distribution network.
Do not apply excessive force or inadequate tools for maintaining and cleaning the unit. Some
repairs must be done with special tools on some occasions.
In these cases, you must contact the Customer Service of SAGOLA. Any handling of this product by
non-authorised personnel would render the warranty null and void.
The unit must be overhauled on a periodic basis to check the status of its components and replace
these when they are not in perfect condition.
EN 28
Nozzle
Description
(inchess / mm.)
09 / 20 0.009" / 0.23
09 / 40 0.009" / 0.23
09 / 60 0.009" / 0.23
11 / 20 0.011" / 0.28
11 / 40 0.011" / 0.28
11 / 50 0.011" / 0.28
11 / 60 0.011" / 0.28
11 / 70 0.011" / 0.28
13 / 20 0.013" / 0.33
13 / 30 0.013" / 0.33
13 / 40 0.013" / 0.33
13 / 50 0.013" / 0.33
13 / 60 0.013" / 0.33
13 / 80 0.013" / 0.33
15 / 20 0.015" / 0.38
15 / 40 0.015" / 0.38
15 / 50 0.015" / 0.38
15 / 60 0.015" / 0.38
15 / 80 0.015" / 0.38
16 / 50 0.016" / 0.41
18 / 40 0.018" / 0.46
18 / 60 0.018" / 0.46
21 / 40 0.021" / 0.53
21 / 80 0.021" / 0.53
Spray Spray width
angle (at 30 cm.)
20° 100-150 mm.
40° 200-250 mm.
60° 300-355 mm.
20° 100-150 mm.
40° 200-250 mm.
50° 250-300 mm.
60° 300-355 mm.
70° 355-405 mm.
20° 100-150 mm.
30° 150-200 mm.
40° 200-250 mm.
50° 250-300 mm.
60° 300-355 mm.
80° 405-457 mm.
20° 100-150 mm.
40° 200-250 mm.
50° 250-300 mm.
60° 300-355 mm.
80° 405-457 mm.
50° 250-300 mm.
40° 200-250 mm.
60° 300-355 mm.
40° 200-250 mm.
80° 405-457 mm.
Water flow
at 100 bar
0.25 L/min.
0.25 L/min.
0.25 L/min.
0.37 L/min.
0.37 L/min.
0.37 L/min.
0.37 L/min.
0.37 L/min.
0.57 L/min.
0.57 L/min.
0.57 L/min.
0.57 L/min.
0.57 L/min.
0.57 L/min.
0.72 L/min.
0.72 L/min.
0.72 L/min.
0.72 L/min.
0.72 L/min.
0.91 L/min.
1.10 L/min.
1.10 L/min.
1.52 L/min.
1.52 L/min.
www.sagola.com