Technical Data; Service Information - Dimplex Mfp 100E Instructions De Montage Et D'utilisation

Table des Matières
Les langues disponibles

Les langues disponibles

English
11.8
Increasing the set point
The room heating device is delivered from the factory
with an adjustable temperature range of 7°C to 26° C.
The upper limit value can be increased (max. 32° C) or
lowered as required.
Press and hold the MENU key, the BACK key and
the ENTER key for five seconds.
SP display flashes.
Press the ENTER key. °C display flashes.
Press the ENTER key. Display 26 (limit value set at
the factory) flashes.
Press
or
to increase or lower the desired
limit value.
Press the ENTER key.
Confirm the BACK key to return to the standard
display.
11.9

Service information

NOTE
This information is exclusively for service technicians.
The following information can be displayed:
UI number Service number display
CC number: Service number electronics
ID number: Service number heating device
Press and hold the ENTER key for five seconds.
INFO display flashes.
Press
or
to select the display Ui, CC or id.
Confirm the BACK key twice to return to the
standard display.
EN-12
NOTE
Display id is a code with 12 digits.
The first 4 digits are shown on level 1.
Press  or  to select the next level (2,3).
12. Warranty
This product is supplied with a two-year warranty
according to our terms of guarantee.
13. Note on disposal
Do not dispose of the unit with general
household waste. The device must be taken to
a local waste disposal plant.

14. Technical Data

Model reference
Nominal voltage
Degree of protection
Dimensions (W x H x D)
Weight
Heat output
Nominal heat out-
put
Minimum heat
output (indicative)
Maximum contin-
P
uous heat output
Auxiliary electricity consumption
At nominal heat
output
At minimum heat
output
In standby mode
Type of control
Electronic room temperature control plus week timer, open window
detection, adaptive start control and working time limitation
Glen Dimplex Deutschland GmbH
Am Goldenen Feld 18
D - 95326 Kulmbach
2208/D
MFP 100E - MFP 200E
GFP
GFP
100EW
150EW
1/N/PE, 230 - 240 V~
IP24, splashproof
671 x 536
741 x 536
x 104 mm
x 104 mm
12 kg
14 kg
P
1.0 kW
1.5 kW
nom
P
1.0 kW
1.5 kW
min
1.0 kW
1.5 kW
max, C
el
0.0 W
0.0 W
max
el
0.0 W
0.0 W
min
el
0.5 W
0.5 W
SB
Tel.: +49 9221 709 700
Fax.: +49 9221 709 701
E-mail: elektroheizung@dimplex.de
www.dimplex.eu
GFP
200EW
911 x 536
x 104 mm
16 kg
2.0 kW
2.0 kW
2.0 kW
0.0 W
0.0 W
0.5 W
Table des Matières
loading

Ce manuel est également adapté pour:

Mfp 150eMfp 200e

Table des Matières