Reset To Factory Settings - Dimplex Mfp 100E Instructions De Montage Et D'utilisation

MFP 100E - MFP 200E
Press or to set the first digit of the number
 

code between 0 and 9.
Press the ENTER key.

Set digits 2, 3 and 4 of the number code in the

same way.
Press the ENTER key. The functions runback timer

(rb) and minimum/maximum temperature (SP) are
locked.
Confirm the BACK key to return to the standard

display.
11.6 Window monitoring
The room heating device is equipped with a
monitoring function that detects whether
unnecessary energy is being consumed due to an
open window. In this case, the heating device reduces
the heat output. The WINDOW MONITORING
function is activated at the factory.
NOTE
The controller may read sudden temperature
decreases in drafty or poor insulated environments as
well as if the heater is undersized for the room.
In this case the feature should be disabled
This function can be activated or deactivated as
follows:
Press and hold the MENU key and the FORWARD

key for five seconds.
rb display flashes.

Press or to select the WINDOW symbol. The
 

symbol flashes.
Press the ENTER key. The ON symbol flashes.

Press or to select the ON or OFF symbol. The
  
symbol flashes.
www.dimplex.eu
Press the ENTER key.

Confirm the BACK key to return to the standard

display.
11.7

Reset to factory settings

Resets all settings made by the user to the pre-set
factory settings.
Press and hold the ENTER key for five seconds.

INFO display flashes.
Press or
 

flashes.
Press the ENTER key. Display N (= no) flashes.

Press or
 

flashes.
Press the ENTER key. All values are reset to

factory settings.
Set the time and date.

2208/D
to select the Fr display. The symbol
to select the Y display. The symbol
English
EN-11