Dimplex MFP 100E Instructions De Montage Et D'utilisation page 17

MFP 100E - MFP 200E
The battery is located on the rear side (C).

Pull out the button cell and replace it (D). Observe

the correct polarity (+ pole as shown).
Carry out assembly in reverse order.

8. Possible operating modes
8.1 Timer week program
Up to four heating program (on/off) can be set for
each weekday. A room temperature can be specified
for each heating program.
TIMER symbol is shown in the display.
8.2 Manual operation
Manual specification of the room temperature.
MANUAL symbol is shown in the display.
8.3 Frost protection
Specified frost protection temperature of 7 °C.
FROST symbol is shown in the display.
NOTE
The room temperature can be changed with the
keys in all operating modes.

In the timer program, this change is only carried out
for the current time program.
9. Commissioning
9.1 Setting the date and time
The control includes a real-time clock with calendar
function.
The date and time are set with the following steps:
Press the MENU key.

Press or to select the DATE & TIME symbol.
  
The symbol flashes.
Press the ENTER key. The time flashes.

Press the ENTER key again. The hours display

flashes.
Use or to set the hours. Press the ENTER
 

key. The minutes display flashes.
Use or to set the minutes. Press the ENTER
 

key. The time flashes.
Press the ENTER key again. The time is saved and

the display DAY & MONTH flashes.
Use or to set the day. Press the ENTER key.
 

The month display flashes.
www.dimplex.eu
Use or


key. YEAR display flashes.
Use or


The date is saved.
Confirm the BACK key to return to the main

display.
10. Operation
10.1 Switching heating operation on/off
or

Switching heating operation on
Press the MAIN MENU key.

Press


symbol. The ON symbol flashes.
Press the ENTER key =>Heating operation on.

Switching heating operation off
Press the MAIN MENU key.

The TIMER symbol flashes.

Press the ENTER key. The ON symbol flashes.

Press


symbol flashes.
Press the ENTER key =>Heating operation off.
2208/D
to set the month. Press the ENTER

to set the year. Press the ENTER key.

or to select the MANUAL or TIMER

or to select the OFF symbol. The OFF

English
EN-5