Totalizer; Test Menu; Ext.act - Burkert 8025 Notice D'utilisation

4 CONFIGURATION

4.4.8 Totalizer

Simultaneous setting of both counters to zero. This facility becomes operational when the
user presses the Enter key while in the « END » option in the Calibration menu.
ENTER
TOTAL
ENTER
END

4.5 Test Menu:

0......9
The following adjustments and checks are carried out in the Test Menu:

EXT.ACT.

RELAY 1
RELAY 2
FREQUENC
END
4.5.1 EXT.ACT.
This sub-menu provides for checking the allocation of binary logic levels to the binary data
inputs under the « EXT.MEM » dosage option and also provides a readout of the pulse
duration under option « EXT [T] ».
« EXT.MEM » Option
ENTER
EXT.ACT.
ENTER
RELAY 1
8025-BATCH-**
RES N°
RES YES
ENTER
simultaneously for 5 s.
Verification of the binary data inputs in mode « EXT.MEM ».
Readout of Pulse duration in « EXT.[T] mode.
Check on relay 1 operation.
Check on relay 2 operation.
Transducer frequency readout
Return to the Main Menu and the setting of new parameters.
V 1
Readout of quantities corresponding to the coding of the binary
inputs (by using the rotary knob, for example). If the readout
shows «--» the coding of the inputs corresponds to a zero quantity.
E-31-
BATCH CONTROLLER 8025
V 4