Publicité
Les langues disponibles
Les langues disponibles
7
troubleshooting
FAULTCODE
DESCRIPTION
Inadequate water supply
F5
Water supply is not stopping.
F3
The waste water can not be
discharged.
F2
The water temperature is not
F8
correct. Heating defect.
Safety is activated against water
F1
overflow.
FE
Faulty electronics.
F7
Overheating error.
F9
Position of the distributor error.
F6
Faulty heat sensor.
40
•
English
IVW4508A-instructions.indd 40
CHECK
• Check whether the tap is fully open and there is nothing blocking the
water mains.
• Close the tap, remove the input hose and check whether it is clogged.
• Start the dishwasher again. Contact the service department of Inventum
when the error remains.
• Close the tap.
• Contact the service department of Inventum.
• The water discharge hose is
clogged.
• The filters might be clogged.
• Turn the dishwasher off. Reset the dishwasher's program and check the
filters and the discharge hose. Restart the dishwasher.
• Contact the service department of Inventum when the error remains.
• Contact the service department of Inventum.
• Turn off the dishwasher and close the tap.
• Contact the service department of Inventum.
• Contact the service department of Inventum.
• Contact the service department of Inventum.
• Contact the service department of Inventum.
• Contact the service department of Inventum.
1-8-2018 09:33:13
Publicité
