Télécharger Imprimer la page

Inventum IVW4508A Mode D'emploi page 25

Masquer les pouces Voir aussi pour IVW4508A:

Publicité

Les langues disponibles

Les langues disponibles

they are made.
• Do not grip the appliance by its door or control panel in order to
move it.
• Make sure that the water inlet and outlet hoses do not get stuck
while positioning the appliance.
• Adjust the appliances adjustable feet to ensure the appliance is
standing level and balanced. Proper positioning of the appliance
ensures problem-free opening and closing of the door.
• If the door of your appliance does not close properly, check if the
appliance stands level on the floor. If not, adjust the adjustable feet
and ensure its stable position.
CONNECTING TO THE WATER TAP AND DRAINAGE
Make sure that the indoor plumbing is suitable for installing a
dishwasher. Also, we recommend that you fit a filter at the beginning
of the water supply in your house to avoid any damage to your
appliance because of any contamination (sand, clay, rust, etc.)
that might occasionally carried in through the mains water supply.
• Always use the new water inlet hose supplied with your appliance.
If you are using the new water inlet hose, run water through it for a
while before making the connection.
• Connect the water inlet hose directly to to the water inlet tap. The
pressure supplied by the tap should be at a minimum of 0,03 Mpa
and at a maximum of 1 Mpa. If the water pressure is above 1 Mpa, a
pressure-relief valve should be fitted inbetween.
• After the connections are made, the tap should be turned
on fully and checked for water leakage.
• The appliance is supplied with an double-walled aquastop.
The system automatically cuts off the water supply if the
water inlet hose starts to leak and the space between
the walls is filled with water. Make sure not to cut into the
aquastop or that it gets twisted or stuck.
• The water drain hose can be connected either directly to a drain
pipe with a minimum diameter of 4 cm, or let it run into the sink,
making sure to avoid bending or crimping it. The free
end of the hose must be at a height between 40 and
100 cm and must
not be immersed in
water.
• Close the water tap
after each use.
IVW4508A-instructions.indd 25
25
English
1-8-2018 09:33:09

Publicité

loading