Publicité
Les langues disponibles
Les langues disponibles
Table of water hardness level settings
Water
German
French
hardness
hardness
hardness
level
dH
dF
1
0-5
2
6-11
3
12-17
4
18-22
5
23-31
6
32-50
FILLING WITH RINSE AID AND SETTING THE CONSUMPTION
Rinse aid is used to prevent traces of water droplets being left on the clean dishes. It also increases the drying performance, since
the water drains off more easily. Only use rinse aid which is designed for use in dishwashers.
• The rinse aid reservoir is located on the inside of the door, alongside the detergent reservoir.
• Open the lid of the rinse aid reservoir (1).
• Fill the rinse aid reservoir until the MAX-level (2). Be careful not to overfill and wipe up any spills. Close the lid.
• The rinse aid level can be adjusted between the setting 1 and 5. The factory setting for rinse aid is level 4.
In order to change the rinse aid level, follow the below steps before turning on the machine:
• Press the program selector button and keep it pressed down while the dishwasher is not on.
• In the meanwhile switch on the dishwasher by pressing the On/Off button.
• Keep the program selector button pressed down until rA disappears from the display.
• The machine will display the current setting.
• Set the level of rinse aid by pressing the program selector button. Use the table settings on the next page..
• After adjusting the rinse aid level press the On/Off button to confirm and store the setting.
You need to increase the level of rinse aid when water stains form on your dishes after a wash program. Decrease it when strips or
blue stains form on the dishes. Keep adjusting the level until the dishes are streak-free when you take them out of the dishwasher.
1
Attention!
• Refill the rinse aid reservoir when the rinse aid indicator lights up.
• Do not overfill the rinse aid reservoir. The reservoir will overflow.
• Spilled rinse aid must be cleaned up. Otherwise they may lead to leakage as a result of extreme foaming.
IVW4508A-instructions.indd 33
British
Hardness level indicator
hardness
dE
Display shows
0-9
0-6
10-20
7-14
21-30
15-21
31-40
22-28
41-55
29-39
56-90
40-63
2
L1
L2
L3
L4
L5
L6
3
33
English
•
1-8-2018 09:33:13
Publicité
