Inventum IVW4508A Mode D'emploi page 37

5
setting the dishwasher
SWITCHING THE DISHWASHER ON AND OFF
1
• Switch the dishwasher on by pressing the On/off button (1).
• Select the desired program with the program selector button (2). The selected program will appear in the display.
• Close the door and the program starts automatically.
The dishwasher remains silent for about 40-50 minutes whilst drying. When the the buzzer sounds five times, the program is
finished.
• Open the door and switch the dishwasher of with the On/off button (1).
NOTE! You can slightly open the door and wait a few minutes before unloading the dishwasher. The dishes and cutlery will still be
very hot and may break as a result of the heat. Moreover, the dishes dry better when allowed to stand for a few minutes.
ENDING OR CHANGING A PROGRAM
If you would like to end a program of change a program while a washing cycle is already running.
• Carefully open the door and select another program with the program selector button (2).
• Close the door and the new program will resume the course of the old program.
NOTE: open the door slightly when you want to open the door in order to stop the washing program before it is completed to
avoid water spillage.
If you would like to end a program or stop the dishwasher:
• Open the door slightly and keep the program selector button (2) pressed for 3 seconds. The indicator light of the program turns
off and the indicator light Ready blinks.
• Close the door so the dishwasher can discharge the water in it for about 30 seconds
• As soon as the program is ended, the buzzer will sound five times and the indicator light Ready is lit.
• Open the door and switch the dishwasher off with the On/off button (1) or select another program with the program selector
button (2) and turn the dishwasher back on.
IVW4508A-instructions.indd 37
2
37
English •
1-8-2018 09:33:13