Dometic PERFECTVIEW CAM360 Instructions De Montage page 33

CAM360
10.5 Creating a SCREENSHOT
I
NOTE
Create a screenshot if you have problems calibrating the 360° view
(chapter "Calibrating the 360° view" on page 33). You can send this
screenshot directly to technical customer service for help.
➤ Press the
button on the remote control.
➤ Select the "SETTINGS".
➤ Enter the password "654321".
➤ Select "SCREENSHOT".
➤ Press the
button on the remote control.
✓ The screenshot has been saved.
10.6 Calibrating the 360° view
!
WARNING!
Danger of personal injury by vehicle.
• Ensure that all areas around the vehicle are displayed by the system.
Blind spots represent a safety hazard.
• Blind spots can occur when the calibration mats were placed too far
away from the vehicle. This particularly applies to front and rear.
I
NOTE
• When positioning the calibration mats, avoid reflective surfaces or
strong shadows.
• It may be necessary to cover reflective surfaces such as the front pane
with a cloth.
• If you have problems with calibration, create a screenshot and send
it to the technical customer service.
EN
Video system settings
33