Thermador An American Icon MCES Manuel D'utilisation page 40

Problem
Oven will not turn on.
Oven will not start
cooking. cooking
The Ceramic Tray
wobbles.
When the oven is
operating, there is noise
coming from the Ceramic
Tray.
The word LOCK"
appears in the Display
Window.
Error message
"Exxxx"
40
Possible cause
The oven is not plugged in securely.
Circuit breaker or fuse is tripped or blown.
There is a problem with the outlet.
The door is not closed completely.
Start Pad was not pressed after programming.
Another program is already entered into the oven.
Another program has not been entered correctly.
Pause/Stop Pad has been pressed accidentally.
The Ceramic Tray is not positioned properly on the
Roller Ring or there is food under the Roller Ring.
The Roller Ring and oven bottom are dirty.
The CHILD LOCK was activated.
Remedy
Remove plug from outlet, wait 10 seconds and
re insert.
Reset circuit breaker or replace fuse.
Plug another appliance into the outlet to check
if it is working.
Close the oven door securely.
Press Start Pad.
Press Pause/Stop Pad to cancel the previous
program and program again.
Program again according to the Operating
Instructions.
Program oven again.
Take out Ceramic Tray and Roller Ring. Wipe
with a damp cloth and reset Roller Ring and
Ceramic Tray properly.
Clean these parts according to Care and
Cleaning of your Microwave oven.
See section Settings.
If an error message is displayed, please
contact the aftersales service and
provide the fault code.