Data Transmission - Bosch GIS 1000 C Professional Notice Originale

OBJ_BUCH-2270-005.book Page 28 Wednesday, September 21, 2016 5:29 PM
28 | English

Data Transmission

Data Transmission via USB Interface
Fold open the cover 1. Connect the micro USB socket 26 of
the measuring tool to your computer or notebook using the
micro USB cable provided 8. The saved JPG files can be cop-
ied, moved or deleted from the internal memory of the meas-
uring tool. Close the cover 1 again when you remove the micro
USB cable.
Note: Connect the measuring tool via USB only to a computer
or notebook. The tool may be damaged if connected to other
devices.
Note: The battery pack of the measuring tool cannot be
charged via the USB interface. To charge the battery pack,
see "Operation with Battery Pack", page 22.
Data Transmission via Bluetooth®
The measuring tool is equipped with a Bluetooth® module,
which enables data transmission via radio technology to cer-
tain mobile terminals/devices with a Bluetooth® interface
(e.g., smartphones, tablets).
Information about system requirements for a Bluetooth® con-
nection can be found on the Bosch website at
www.bosch-professional.com.
To switch on the Bluetooth® connection on the measuring
tool, open the "Main Menu" (see "Navigating the "Main
Menu"", page 28) and set "Bluetooth" to "On". The indicator
f will appear on the display. Ensure that the Bluetooth® inter-
face is activated on your mobile terminal/device.
Special Bosch applications (apps) are available to extend the
functional range of the mobile terminal/device and for simpli-
fication of the data processing. Depending on terminal/de-
vice, these can be downloaded at the respective app stores:
The connection between mobile terminal/device and measur-
ing tool is established after the Bosch application has started
(if Bluetooth® modules are activated). If multiple active meas-
uring tools are found, select the appropriate measuring tool.
A connection will be established automatically if only one ac-
tive measuring tool is found.
Note: When establishing the connection between the mea-
suring tool and the mobile terminal/device (e.g., smart-
phone, tablet) the first time (pairing), the measuring tool's
PIN code may be requested. In this case, enter "0000".
When transmitting data by means of Bluetooth®, time lags
may occur between mobile terminal/device and measuring
tool as a result of poor reception conditions.
1 609 92A 211 | (21.9.16)
"Main Menu"
Navigating the "Main Menu"
– To go to the "Main Menu", press the right-
hand function button 10 under the menu sym-
bol m on the standard display screen.
– To navigate within a menu level, press the up-
ward arrow button 16 or the downward arrow
button 13 repeatedly until the desired menu
item is highlighted in colour.
– If there is a submenu for a highlighted menu
item, this will be indicated by an arrow point-
ing to the right next to "set ...". Press the
right-hand arrow button 11 to enter the sub-
menu.
– If there are multiple options for a highlighted
menu item, the current setting is displayed be-
tween two arrows. To change the setting,
press the left-hand arrow button 15 or the
right-hand arrow button 11. Numerical values
are changed faster if you keep the corre-
sponding arrow button pressed.
– In some menu items you can switch a function
on or off. To switch off, press the left-hand ar-
row button 15 so that "Off" is highlighted. To
switch on, press the right-hand arrow button
11 so that "On" is highlighted. You can also
switch the function on and off in the menu by
pressing the save/send button 9.
– To switch to a parent menu, press the left-
hand function button 17 under the back sym-
bol. The selected settings will be saved.
– To exit the "Main Menu" and return directly to
the standard display screen, press the right-
hand function button 10 under the house
symbol. The selected settings will be saved.
– You can also press the measure button 4 to ex-
it any menu and return to the standard display
screen. If the button is pressed once, the se-
lected settings will be saved but no measure-
ment will be initiated.
"Tool" Submenu
Open the "Main Menu" and select the "Tool" submenu. It
contains the following menu items:
– Language:
In the "Language" menu you can change the language of
all indications.
– Time/Date:
To change the date and time in the indicator a, open the
"Time & Date" submenu. In this submenu you can also
change the date and time format.
To exit the "Time & Date" submenu, press either the left-
hand function button 17 under the tick symbol to save the
settings or the right-hand function button 10 under the
cross symbol to discard the changes.
Bosch Power Tools