Technical Data; Inserting/Replacing The Batteries - Bosch GIM 60 L Professional Notice Originale

OBJ_BUCH-1628-003.book Page 15 Wednesday, March 19, 2014 9:40 AM
8 Button for extracting the levelling foot
9 Adjusting screw of the levelling foot
10 Switch for retracting the levelling foot
11 Display
12 Spirit level, horizontal
13 Spirit level, vertical
14 Magnets
15 Opening for strap attachment
16 Pedestal
17 Levelling foot
18 Tripod mount 1/4"
19 Laser On/Off button
20 Battery lid, laser
21 Exit opening for laser beam
22 Laser warning label
23 Serial number
24 Protective pouch
25 Fastening strap
26 Tripod*
* The accessories illustrated or described are not included as standard delivery.
Display Elements
a Alignment aids
b Reading
c Audio signal indicator
d Battery low indicator
e Indicator for changed zero point
f Unit of measure

Technical Data

Digital level
Article number
Measuring range
Measuring accuracy
– 0°/90°
– 1°–89°
Working range of laser
Vertical levelling accuracy of laser
Clearance of laser exit – bottom edge of
measuring tool
Laser class
Laser type
Laser beam diameter (at 25 °C) approx.
– at 5 m distance
– at 10 m distance
Operating temperature
Storage temperature
Relative air humidity, max.
Tripod mount
Batteries
– Grade Measurement
– Laser operation
Operating time, approx.
– Grade Measurement
– Laser operation
Weight according to EPTA-Procedure 01/2003
Dimensions (length x width x height)
1)
The working range can be decreased by unfavourable environmental conditions
(e.g. direct sun irradiation).
The measuring tool can be clearly identified with the serial number 23 on the type plate.
Assembly

Inserting/Replacing the Batteries

The measuring tool has two separate electric circuits: The grade measure-
ment and display are powered by a different battery than the laser.
Alkali-manganese batteries are recommended for the measuring tool.
 Remove the batteries from the measuring tool when not using it for
extended periods. When storing for extended periods, the batteries can
corrode and self-discharge.
Inserting/Replacing the Battery for Grade Measurement
Carefully remove the battery lid 7 with the battery holder from the measur-
ing tool. Pay attention that neither the connection cables of the battery nor
the battery lid become damaged. Damage on the supporting surfaces of the
battery compartment 7 can lead to faulty measurements.
Bosch Power Tools
1)
English | 15
GIM 60 L
3 601 K76 300
0–360° (4 x 90°)
±0.05°
±0.2°
30 m
±0.5 mm/m
24 mm
2
635 nm, <1 mW
3.5 mm
6 mm
–10 °C...+50 °C
–20 °C...+70 °C
90 %
1/4"
1 x 9 V 6LR61
2 x 1.5 V LR03 (AAA)
300 h
20 h
0.9 kg
600 x 27 x 59 mm
1 609 92A 0KV | (19.3.14)