Agilent IDP-3 Mode D'emploi page 159

Technical Information
IPD-3 Principal Items
14
Figure 17 Principal Items
1. Front Cowling Screws; M5 (4)
2. Front Cowling
3. Inlet (NW16)
4. Inlet Screen
5. 10 mm Hose Barb
6. Gas Ballast Port (1/8" NPT adapter provided)
7. Frame
8. Base
9. Mounting Holes; (4) for 1/4" or M6 Hardware
10. Rear Cowling
11. Rear Cowling Screws: M5 (4)
12. On/Off Switch/Power Connection (IEC-320)
or power cord with free leads for DC version
13. Hour Meter
14. Hex head bolts
CAUTION
Never disturb the two hex head bolts on each side
of the pump head. Disturbing these bolts will
cause loss of performance and/or pump damage.
159