Agilent IDP-3 Mode D'emploi page 155

Technical Information
Technical Specifications
Table 1 Technical Specifications
Interface dimensions
Peak pumping speed
Media
Ultimate pressure*
Maximum inlet pressure
Maximum outlet pressure
Inlet connection
Exhaust connection
Gas ballast
Ambient operating temperature
Storage temperature
Motor rating
Operating voltages**
Run current
Motor thermal protection
Operating speed
See the following figure
3
• 50 Hz: 50 L/m, 3.0 m / hr (1.8 cfm)
3
• 60 Hz: 60 L/m, 3.6 m / hr (2.1 cfm)
• 24 VDC: 60 L/m, 3.6 m 3
at full speed setting
No corrosive, explosive or particulate forming
gases
2.5 x 10 -1 Torr (3.3 x 10 -1 mbar)
1.0 atmosphere (0 psig)
6.5 psig
NW16
Female 1/4" National Pipe Thread
(10 mm hose barb provided)
Female 1/8" National Pipe Thread
(adapter provided)
5 °C to 40 °C (41 °F to 104 °F)
–20 °C to 60 °C (–4 °F to 140 °F)
• AC: 0.16 HP (0.12 kW)
• DC: 0.16 HP (0.12 KW) Peak rating: 0.27 HP
(0.20 KW)
• 1 phase/ 100 VAC, ±10%, 50/60 Hz,
2.31/2.39 FLA
• 1 phase/ 115 VAC, ±10%, 60 Hz, 2.41 FLA
• 1 phase/ 220-230 VAC, ±10%, 50/60 Hz,
1.17/1.26 FLA
• 24 VDC, ±10%, 7.5 FLA
See Table 3
Automatic thermal protection
• 60 Hz: 3200 RPM, 50 Hz: 2600 RPM
• 24V DC: variable speed,
factory setting@ 3200 RPM
/ hr (2.1 cfm)
155